beautypg.com

Environment compliance, Certifications – Rockwell Automation 1606-XLP50E Power Supply Reference Manual User Manual

Page 14

background image

All parameters are specified at 24V, 2.1A, 230Vac input, 25ªC ambient and after a 5 minutes run-in time unless noted otherwise.

14

Rockwell Automation Publication 1606-RM034A-EN-P — March 2014

Bulletin 1606 Switched Mode Power Supplies

Product certification information (including Certificates and Declarations of Conformity) can be found at

www.ab.com/certifications

.

21. Certifications

UL 508

IND. CONT. EQ.

LISTED as Industrial Control Equipment E198865

UL 60950-1

RECOGNIZED E168663 recognized for use in the U.S.A. (UL 60950-1) and Canada
(C22.2 No. 60950). Information Technology Equipment, Level 3

NEC Class 2

Listed as Limited Power Source (LPS) in the UL 60950-1 UL report.

ISA 12.12.01, CSA

C22.2 No. 213

RECOGNIZED UNDER FILE NUMBER E244404 for use in the U.S.A. (ISA 12.12.01)
and Canada (C22.2 No. 213)
Hazardous Location Class I, Div. 2, Groups A, B, C, D

Marine GL

GL

GL (Germanischer Lloyd) classified for marine and offshore applications.
Environmental category: C, EMC2. See below for link to Certificate.

SEMI F47

SEMI F47-0706 Voltage Sag Immunity Compliance. See below for link to
Certificate.

EN 60950-1,
EN 61204-3

Complies with CE EMC and CE Low Voltage Directives

Marine RINA

RINA (Registro Italiana Navale) certified. See below for link to Certificate.

GOST R

GOST R certification is applicable for products intended for sale and use
within Russia. See below for link to Certificate.

C-TICK

C-tick compliance is for products intended for sale and use within the
Australian market. See below for the link to the C-Tick Declarations
of Conformity.

22. Environment Compliance

Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.

Plastic housings and other molded plastic materials are fre e of halogens, wires and cables are not PVC insulated.

The unit conforms to the RoHS directive 2002/96/EC

The materials used in our production process do not include the following toxic chemicals:
Polychlorinated Biphenyl (PCB), Pentachlorophenol (PCP), Polychlorinated naphthalene (PCN), Polybrominated
Biphenyl (PBB), Polybrominated Biphenyl Oxide (PBO), Polybrominated Diphenyl Ether (PBDE), Polychlorinated
Diphenyl Ether (PCDE), Polybrominated Diphenyl Oxid e (PBDO), Cadmium, Asbestos, Mercury, Silica