Rockwell Automation 1500 Modular Protection System Conversion Kit (GE Multilin to Bulletin 825 Plus) - Manual (Page 46)

Appendix
B
1500-IN059C-EN-E – June 2013
Technical Data
825 Plus
Refer to Publication 825-UM004_-EN-P.
Conversion Kit Interface Panel
Converter Module
Description Specification
Terminals
• 0.5 to 1.5 mm 2 (20 AWG to 14 AWG), single wire
• 0.5 to 1.5 mm 2 (20 AWG to 14 AWG), double wire
• 0.5 to 1.5 mm 2 (20 AWG to 14 AWG)
Bulletin 825 plug-in terminals
(Range of cross-section)
• Nom inal 1.5 mm 2 (.0023 in.2)
• 2 x 2.5 mm 2 / 1 x 4 mm 2 (2 x .0039 in. 2 / 1 x .006 in. 2 )
Cat. No. 825-MCM20 /
825-MCM5
• 2 x 0.5 to 1.5 mm 2 (20 AWG to 14 AWG) /
1 x 0.5 to 2.5 mm 2 (20 AWG to 12 AWG)
Description Specification
Terminals (TB1)
Type 1492-
CA3
Approvals CSA certified and UL listed
Voltage Rating 600 V AC/DC
Maximum Current 20 A
Wire Range 0.5 to 1.5 mm 2 (#22 – #14 AWG)
Wire Strip Length Prepared conductors only
Recommended Tightening Torque 12 lb.-in. (1.4 Nm)
Insulation Temperature Range -40°C to +105°C (-40°F to +221°F)
Terminals (TB2)
Type P
hoenix Connector
Terminals (TB3)
Type 1492-
CD3
Approvals CSA certified and UL listed
Voltage Rating 600 V AC/DC
Maximum Current 35 A
Wire Range 0.5 to 6 mm 2 (#22 – #10 AWG)
Wire Strip Length Prepared conductors only
Recommended Tightening Torque 10 – 16 lb.-in. (1.1 – 1.8 Nm)
Insulation Temperature Range -40°C to +105°C (-40°F to +221°F)