Rockwell Automation 855T DeviceNet Stack Light User Manual - Manual (Page 14)

Publication 855T-UM001C-EN-P May 2005
Chapter
2
Quick Start
Chapter Objectives
This chapter provides the necessary steps to get the DeviceNet Stack Light operating on the
network. It contains the following sections:
Data Rate Configuration
Rotary switch 3 (S3) sets the data rate at which the DeviceNet Stack Light communicates on
the DeviceNet Network. The factory default setting is 125 KB.
Figure 2.1
For more information on data rate configuration, refer to Chapter 3 — Installation and
Mounting (Setting the Data Rate).
Table 2.A
Section Page Section Page
Data Rate Configuration 2-1 Connection to the Network 2-2
Node Address Configuration 2-2 Stack Light Parameter Configuration 2-3
Installing the Modules 2-2 — —
DATA
RATE
PGM
500K
250K
NOT
USED
MSD
NODE ADDRESS
(00 – 63, PGM)
4 6
2
0
8
125K
PGM
0 LSD
2
4 6