Summary of changes, New and updated information – Rockwell Automation 20D-P2-DG03 DriveGuard Safe Torque Off Option for PowerFlex 700S Phase II and 700L Drives User Manual
Page 3
Rockwell Automation Publication 20D-UM007G-EN-P - March 2012
3
Summary of Changes
This manual contains new and updated information.
New and Updated Information
The following changes apply to this revision of the manual.
Change
See Page…
Added “Original Instructions” to the front cover.
–
Updated the Important statement regarding the proper use of the Safe
Torque Off option.
Updated the information in the Evaluation/Certification by TÜV Rheinland
Group table to support frame 5 and 6 and frames 9…14 drives.
Updated the information in the PFD and PFH for 20-year Proof Test
Interval table to support frame 9…14 drives.
Added steps for installing the Safe Torque Off option board in frame
9…14 drives.
Added frames 9…14 drives to wiring diagram example 2.
This manual is related to the following products: