Rockwell Automation 22B PowerFlex 40 FRN 1.xx - 6.xx - Manual (Page 55)

Programming and Parameters 3-9
PowerFlex 40 Adjustable Frequency AC Drive FRN 1.xx - 6.xx User Manual
Publication 22B-UM001H-EN-E
Basic Program Group
P031 [Motor NP Volts] Related Parameter(s): d004 , A084 , A085 , A086 , A087
Stop drive before changing this parameter.
Set to the motor nameplate rated volts.
Values Default: Based on Drive Rating
Min/Max: 20/Drive Rated Volts
Display: 1 VAC
P032 [Motor NP Hertz] Related Parameter(s): A084 , A085 , A086 , A087 , A090
Stop drive before changing this parameter.
Set to the motor nameplate rated frequency.
Values Default: 60 Hz
Min/Max: 15/400 Hz
Display: 1 Hz
P033 [Motor OL Current] Related Parameter(s): A055 , A058 , A061 , A089 , A090 ,
A098 , A114 , A118
Set to the maximum allowable motor current.
The drive will fault on an F7 Motor Overload if the value of this parameter is exceeded by 150% for 60
seconds.
Values Default: Based on Drive Rating
Min/Max: 0.0/(Drive Rated Amps
×
2)
Display: 0.1 Amps
P034 [Minimum Freq] Related Parameter(s): d001 , d002 , d013 , P035 , A085 ,
A086 , A087 , A110 , A112
Sets the lowest frequency the drive will output continuously.
Values Default: 0.0 Hz
Min/Max: 0.0/400.0 Hz
Display: 0.1 Hz
P035 [Maximum Freq] Related Parameter(s): d001 , d002 , d013 , P034 , A065 ,
A078 , A085 , A086 , A087 , A111 , A113
Stop drive before changing this parameter.
Sets the highest frequency the drive will output.
Values Default: 60 Hz
Min/Max: 0/400 Hz
Display: 1 Hz
22B-UM001.book Page 9 Wednesday, January 22, 2014 11:04 AM