beautypg.com

Replacing fuse – Yamato Scientific Vacuum controller Vacuum controller User Manual

Page 28

background image

26

Replacing Fuse

1. Put an appropriate tool(e.g. a flathead screw driver) into a hole at the top of the fuse box on

the rear. Hold a lever inside with the tool and pull it.

2. The fuse is removed with a fuse holder. Pull out the disconnected fuse from the fuse holder

and replace to new one.

3. Insert the fuse holder and push it lightly and the lever is locked.

Fuse Box

Fuse Holder

Fuse Pipe