Using the function menu – Yamato Scientific Vacuum controller Vacuum controller User Manual

Page 21

Text mode
Original mode

Using the Function Menu

The function menu is accepted either before or during operations.

The measurement calibrating system is programmed in the function menues of the fixed

value control mode and of the free mode. The calibration mode is accepted before a control
starts,or,while a control operates.

There

are

「Ramp time edit」and 「Pressure ramp level edit」system in the ramp control as

a series.

When FUNCTION MENU is pressed again, just before ENTER is pressed to decide values;

☆ Function selectings and set point editings, which has been done in the function menu,are
stopped.
☆ Operations, which has been running untill FUNCTION MENU was pressed, are returned.
The set point which was decided during editing is restored.

If there is no key operations for ten seconds after FUNCTION MENU was pressed, the

indication is returned to the original state.