Western Digital My Net AC1300 Router User Manual - Manual (Page 59)

PERFORMING ADVANCED TASKS
55 MY NET AC1300 ROUTER
USER MANUAL
3. Specify the following information for each rule you create:
4. Click Save at the top or bottom of the page.
Port Forwarding Rules
Enabled Select the check box to enable the rule. Clear the check box to
disable it.
Application Name From the drop-down list, select the application whose data you
want to forward to the client on your local network. Click the
double arrows to populate Name, Internal Port, External
Port and Protocol.
External Port Range Enter the port(s) you want to forward from the WAN interface
(Internet). The port is automatically populated when you pick an
application from the drop-down list.
Protocol Select the protocol that you wish to port forward. The options
are All, TCP, and UDP. The protocol automatically displays if you
pick an application from the drop-down list.
IP Address Can be manually entered or populated by your selection from
the Computer Name drop-down list.
Computer Name Device on your local network to which the rule will be applied.
Click the double arrows to populate the IP Address field.
Internal Port Range Enter the port(s) on the LAN client to which you want to forward
data. The port is automatically populated when you pick an
application from the drop-down list.