Western Digital My Net AC1300 Router User Manual - Manual (Page 28)

BASIC SETTINGS AND TASKS
24 MY NET AC1300 ROUTER
USER MANUAL
Note: The label on the bottom of the router also displays the default PIN. You
can change the PIN on the Wi-Fi Protected Setup screen. (See “Advanced
WAN (Internet) Category” on page 27.) Once you change the PIN, the
default value is invalid unless you reset the router or the PIN to default
values.
3. Click Next. The first Add a Device screen displays.
To connect a device that is not WPS enabled:
1. On the first Add a Device screen (see “Adding a Device” on page 23), click Click here
to connect by entering network name and password.
2. Using the values shown on the screen, enter the following into your wireless device’s
Wi-Fi connection screen as prompted:
„ The Wi-Fi network name (SSID) for each wireless network you want to use
„ The password for the wireless network you selected
3. Click Close.