beautypg.com

Setting up the dhcp server on the my net router – Western Digital My Net AC1300 Router User Manual User Manual

Page 56

background image

PERFORMING ADVANCED TASKS

52

MY NET AC1300 ROUTER
USER MANUAL

Setting up the DHCP Server on the My Net Router

You can use your router as a DHCP server that assigns IP addresses to other components
of your network.

To set up a DHCP Server on your My Net AC1300 Router:

1. On the Advanced Setting screen, click the LAN icon.

2. Click the DHCP Server Settings tab:

3. Enable DHCP server (On by default) and click Save.

4. Configure DHCP IP Address Range.

Note: Note: The first part of the DHCP address range (192.168.1 by default) is

determined by the router's LAN IP address.

5. (Optional) Set a Local Domain Name.

6. Set the DHCP Lease Time (hours) and click Save.

7. Connect all of the client devices.

See also other documents in the category Western Digital Computer hardware: