Network ups – Western Digital My Cloud EX2 User Manual User Manual
Page 127
CONFIGURING SETTINGS
122
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
Network UPS
An Uninterruptible Power Supply (UPS) is a device that works off of a battery and keeps
devices that are connected to the UPS port running for at least a short time if the main
power source goes out.
SNMP
Simple Network Management Protocol. Select this option to
manage devices over IP networks.
• To enable/disable SNMP, click the toggle button
.
Note:
See the WD Tech Support Downloads page at
to download the MiB configuration file.
SSH
Secured Shell protocol. Select this option to securely access your
personal cloud and perform command-line operations via the
Secured Shell (SSH) protocol. SSH is disabled by default.
• To enable/disable SSH, click the toggle button
.
WARNING!
Please note that modifying or attempting to modify
this device outside the normal operation of the
product voids your WD warranty.
Note:
The SSH login User Name is sshd.
Dynamic DNS
Select this option to host a server (Web, FTP, Game server, etc.)
using a domain name.
1.
To enable/disable Dynamic DNS, click the toggle button
.
2.
Click Configure.
3.
On the DDNS Settings screen, enter the following information:
•
Server Address: Select a server address from the drop-down
menu.
•
Host Name: Enter a Host Name for the server.
•
User Name or Key: Enter a User Name or Key for the server.
•
Password or Key: Enter a password or key for the server.
•
Verify Password or Key: Re-enter the password or key for the
server.
4.
Click Save.