USG One-Directional Curvatura 3-D System - Manual (Page 12)

Manufactured by
USG Interiors, Inc.
550 West Adams Street
Chicago, IL 60661
IC402/rev. 12-03
© 2003, USG Interiors, Inc.
Printed in U.S.A.
Technical Service
800 USG . 4 YOU
Web Site
www.usg.com
Samples/Literature
888 874.2450
Samples/Literature E-mail
samplit
@
usg.com
Samples/Literature/Fax
888 874.2348
Customer Service
800 950.3839
Safety First!
Follow good safety practices.
Read material safety data
sheets and related literature on
products before specification
and/or installation.
Note
All products described here
may not be available in all
geographic markets and are
subject to change without
notice. Consult your local
sales office or representative
for information.
Trademarks
The following are trademarks of
USG Interiors, Inc. or a related
company: C urvatura , USG.
Notice
We shall not be liable for
incidental or consequential
damages, directly or indirectly
sustained, nor for any loss
caused by application of these
goods not in accordance with
current printed instruction or
for other than intended use.
Our liability is expressly limited
to replacement of defective
goods. Any claim shall be
deemed waived unless made
in writing to us within thirty
(30) days from the date it was
or reasonably should have
been discovered.