USG Topo Ceiling System - Manual (Page 4)

K.
M. N. O
P.
Then, insert the second tab on the Splice
Clip through the slot at the end of the
other Main Tee. Next, butt the Main Tees together snugly.
Then, bend down the Splice Clip tabs for a
tight connection. When you’re finished hanging the first
row, examine the completed row from the
side to ensure that the hanger wires are
plumb. Wires should hang straight and plumb
within 1 in 6, about 10 degrees. If
hangers need to be relocated, move them
now.
Examine each completed row of Main
Tees from one end. It should be straight
with no waves.
If you need to install additional hanger
wires, install them now.
T OPO Ceiling
System
Installation
Instructions
Step 2: Main Tee Installation
J.
To join two Main Tees, insert one tab
on the Splice Clip through the slot at the
end of one Main Tee.
Page 4 of 12
L.