beautypg.com

Frame-mounted backlit system, Installation – perimeter frame – USG Pixels Wall Mounted User Manual

Page 24

background image

22 P

ixels

Design and Installation Guide

Frame-Mounted Backlit System

Installation – Perimeter Frame

Step 1

8" min.

floor line

horizontal reference line

vertical reference line

Establish the bottom corner of the
installation to be at least 8 inches
off the floor and use a cross laser
to determine both vertical and
horizontal control lines.

Step 2

Install perimeter frame attachment
clips (WMPFAC) inside of the
trim per shop drawing supplied.
Pre-assemble the corner splice into
the bottom horizontal trim piece.

Note: These installation instructions cover the basic rectangular design using 28 x 28 panels.
There will be more complex designs that require a different or more complex grid layout.

Installation Detail