beautypg.com

Surface-mounted system, Installation – USG Pixels Wall Mounted User Manual

Page 14

background image

12 P

ixels

Design and Installation Guide

Surface-Mounted System

Installation

Step 1

Establish a vertical and horizontal
control line with a laser or chalk
line that is at the intersection of
4 panels.

Step 2

In order to assure proper horizontal
alignment, it is recommended that a
temporary ledger board be installed
on the horizontal control line the
entire length of the finished wall
installation.

Note: These installation instructions cover the basic rectangular design using 28 x 28 panels.
There will be more complex designs that require a different or more complex grid layout.