Unisteer Ididit Keyless Ignition - Manual (Page 8)

7
KEy FOB LEARNING mODE:
The KEY TO KEYLESS has the ability to learn up to 5 unique Key FOB Tags.
Should you ever want to add an additional FOB for a spare or replacement,
you can use the following instructions to program a new FOB(s) into your
system.
*** Note: If you have lost all FOB to your system and need to add a
replacement FOB, you will need to gain access to the system by first
using the “Emergency Bypass” sequence, then proceed into “FOB
Learning mode”
To enter “Key FOB Learning Mode”, first put system in Accessory mode
by pressing the start button one time without putting your foot on the brake.
Once in Accessory Mode, put your foot on the brake and continually hold it
down.
Next, press the programming Button 10 times. The LED should begin flashing
fast then turn ON solid.
Next, (within 5 seconds) push and hold down the Lock button of the 1 st Key
FOB you wish to program into the systems. The Start Button LED will flashe
3 times indicating the Key FOB has been learned.
Once you see the 3 flashes you can add additional Key FOBs using the
same method up to a total of 5 Key FOBs per system. when you have
added all Key FOBs you wish to add to the system, simply wait. The system
will automatically exit the Key FOB Learning mode 5 seconds after your last
FOB was added to the system. The LED will again begin a long flashing fast
sequence indicating the system has exited Programming Mode. Just cycle
out of Accessory mode to return to normal operation.