Unisteer Ididit Keyless Ignition - Manual (Page 3)

2
SYSTEM OvERvIEw:
Your Key to Keyless Intelligent Push Button Start system consists of:
Ignition Control Module (ICM), Start Button with LED & Gasket, three
Power Harnesses & one Programming Switch and two system Key
Fob Transmitters.
The systems Key Fob is a motion activated RFID device that
automatically communicates with the Ignition Control Module as you
move within proximity of your vehicle, (Typically about 10 feet). Each
Key Fob is completely unique with over 6 billion different codes. A
single Key Fob can be programmed into multiple vehicles allowing its
user to operate all his / her vehicles, motorcycles, boats or other toys
by carrying just one Key Fob
The Ignition Control Module (ICM) provides two functions, it
communicates with the system Key Fob(s) and provides switching
operations for your Ignition, Accessory and Starter circuits.
Basic installation consists of; mounting and connecting the Start
Button, mounting the ICM under your dash. Connecting the 3 or 4 wires
from your vehicles Ignition switch to the ICM along with any Accessory
Harness connections appropriate for your particular installation. Then
lastly, testing your system.