Unisteer 8000770-02 Camaro 1967-69/Nova 1968-74 User Manual
Applications/provisions
pg. 1
655420
‘67-69 Camaro/’68-74Nova Manual Rack & Pinion
#8000770-01, 8000770-02
Full refund will NOT be granted to any kits that are
damaged, scratched, or altered in any fashion.
ALTHOUGH THIS KIT IS FAIRLY SIMPLE TO INSTALL SOME MODIFICATIONS
ARE NECESSARY TO INSTALL.
BEFORE STARTING BE AWARE OF THE MODIFICATIONS NEEDED.
ALSO BE AWARE THAT THERE ARE APPLICATION/PROVISIONS NEEDED IN
ORDER TO INSTALL. PLEASE READ ALL INSTRUCTIONS FIRST.
DUE TO VARIABLES OUTSIDE OUR CONTROL THESE KITS MAY NOT FIT ALL
APPLICATIONS. ALSO, PLEASE VERIFY KIT WILL FIT YOUR APPLICATION
BEFORE ALTERING VEHICLE.
Applications/Provisions
This rack and pinion kit is designed specifically for 1967-69 Camaro (NOT Firebird) & 1968-74
Nova’s. The kit is compatible with both big block and small block Chevy motors.
This kit requires installing a new steering shaft between the steering column, and the rack and pinion.
The steering shaft is also available through Unisteer Performance Products, but you will need to
provide us with the year, engine type, and if your using a stock column. If you are using an
aftermarket column, state what brand. Big Block Chevy engines are limited to using certain shape
headers, or stock manifolds.
For small block vehicles we used Hooker Long Tube Competition Headers in our R&D. These
required no modification however we do not guarantee these to fit every car because of variances
between vehicles. All other headers may require modification to fit including Super Competition
Headers. We recommend coating your header of choice after the complete kit is installed and all
modifications complete.