Titus UnderFloor Products IOM - Manual (Page 18)

18 Installation Manual - Underfloor Products
Underfloor Products IOM
Redefine your comfort zone. ™ | www.titus-hvac.com
Figure 11. TAF-HC, TAF-D and TAF-V Installation
TAF-HC, TAF-D and TAF-V Diffusers with Plenum
The TAF-HC, TAF-V and TAF-D diffuser plenums were designed to install
easily in the floor without the need to remove the floor tile.
Installation requires a 8 5/8” by 16 5/8”mounting hole cut into the ac-
cess floor tile.
Attach the CT-TAF grille frame to the TAF-HC / TAF-V / TAF-D plenum us-
ing sheet metal screws prior to installation in the floor. For the TAF-HC
and TAV-V, the actuator and thermostat must be wired before the unit is
installed in the floor tile. Once the CT-TAF frame is attached to the ple-
num, slide the assembly into the hole in the floor tile. (Figure 11).
The wiring for the TAF-HC and TAF-V is shown in (Figure 12).
Figure 12. TAF-HC and TAF-V Wiring