Titus UnderFloor Products IOM - Manual (Page 10)

10 Installation Manual - Underfloor Products
Underfloor Products IOM
Redefine your comfort zone. ™ | www.titus-hvac.com
The TAF-R / TAF-R-FR diffuser and TAF-G grommet were designed to in-
stall easily in the floor without the need to remove the floor tile. The
TAF-R / TAF-R-FR and TAF-G should be installed after the installation of
carpet. The TAF-R / TAF-R-FR and TAF-G install using the mounting ring
spring clip assembly.
Installation requires a 8 5/8” mounting hole cut into the access floor tile.
It is recommended that the tile is pre-cut from the tile manufacturer to
ensure a consistent, round 8 5/8” hole.
Note: The trim ring should be able to move freely in the mounting hole.
Irregular shaped holes may bind the trim ring and force it to not properly
seat in the mounting hole.
Open/close indicator
is raised from the trim
ring and diffuser core.
Last edited: 2-7-97
[Metric]
Last edited by: JLM
[MTAFG1] [TAFG1]
Pivot Cover
Grommet Cover
Trim Ring
Mounting Ring
Grommet Seal (optional)
Figure 5. TAF-R Diffuser
Figure 7. TAF-G Grommet
Figure 6. Position Indicator
TAF-R / TAF-R-FR Diffusers and TAF-G Grommet