Titus UnderFloor Products IOM - Manual (Page 11)

11 Installation Manual - Underfloor Products
Underfloor Products IOM
Redefine your comfort zone. ™ | www.titus-hvac.com
Figure 8. Trim ring installation
Figure 9. Basket installation
Figure 10. Face installation
Place trim ring above the mounting hole. Press the trim ring into the floor
by using your weight to press down on the trim rings so the clips engage
below the floor tile (Figure 8).
Place the inner damper basket in the outer dirt basket and insert the
baskets into the trim ring (Figure 9). The outer basket has three tabs
which are keyed to the trim ring so that the baskets will only install flush
in one position.
For the TAF-R / TAF-R-FR, place the diffuser in the trim ring (Figure 8) and
align the open / closed position indicator (Figure 6). For the TAF-G, snap
the grommet cover into the trim ring (not shown).
For the TAF-R / TAF-R-FR with the optional actuator, the actuator inter-
connect diagram can be seen on page 12 of this document.
TAF-R / TAF-R-FR Diffusers and TAF-G Grommet (continued)