Titus RadiaTec IOM - Manual (Page 7)

Surface Mount Installation
RadiaTec Diffusers
(Continued)
For models ordered with HEPA filter rack, follow the above directions with these exceptions:
A. Gasketing is a standard option for HEPA rack models. Figure 11 shows the
general location of gasket, while Figure 12 shows a close up view of where
the gasketing is often applied.
B. Instead of Step 6 in the preceding steps, the screws are used to attach the back
pan flange to the HEPA filter frame.
C. Follow the Cleaning and HEPA Filter Replacement installation guidelines on
Page 9 to install the filter.
Figure 11
Figure 12
Page 7