Titus RadiaTec IOM - Manual (Page 4)

RadiaTec Diffusers
Lay-In Ceiling Grid Installation
Page 4
A. Gasketing is a standard option for HEPA rack models. Figure 4 shows the
general location of gasket, while Figure 5 shows a close up view of
where the gasketing is often applied
B. Instead of Step 4 in the preceding steps, the screws are used to attach the
back pan flange to the HEPA filter frame.
C. Follow the Cleaning and HEPA Filter Replacement installation guidelines on
Page 9 to install the filter.
For models ordered with HEPA filter rack, follow the directions on the preceding
page with the following exceptions:
Figure 4
Figure 5
(Continued)