Titus RadiaTec IOM - Manual (Page 5)

Surface Mount Installation
Surface mounting of the Titus RadiaTec diffuser is accomplished with the use of the Titus
TRM rapid mount frame.
The diffuser face can be assembled to the back pan prior to installation. Due to the weight of
the diffuser, the Titus RadiaTec was designed for assembly in the ceiling, if necessary. The
assumption for the following installation procedure is access to the ceiling space is limited.
To assemble the diffuser in the ceiling, use the information provided in the following steps:
Page 5
RadiaTec Diffusers
STEP 1. Install back pan by attaching to duct and using wires to suspend it from the
ceiling above.
STEP 2. Install the Titus TRM Rapid Mount frame by wedging the ceiling between
the security clip and the frame, assemble together using self-tapping
screws supplied. Figure 6 shows a detailed view of the security clip
mounting.
STEP 3. Lay the diffuser face into the TRM frame. Figure 7 shows the TRM frame
and other installation components.
Figure 6
Figure 7