Titus LSC IOM - Manual (Page 6)

General Information
The LSC units are intended for single or multi zone applications with an airflow range of 400 to 1850 CFM. The LSC units
incorporate as standard a Primary Air damper which receives air from a Dedicated Outside Air system (DOAS), high
efficiency ECM motor(s) and are available as two-pipe systems with or without electric heat (one hydronic circuit), four-pipe
system (two hydronic circuits) or four-pipe with standby electric heating. The unit mounted low voltage 24 VAC, 50VA
Class II transformer provides low voltage to the ECM motor controls and connections field mounted controller/damper
actuator. See
Figure 1 for unit components.
Primary Air Inlet c/w:
Aerocross – Airflow measuring device
Damper Blade
Return Air:
Non Ducted (STD)
Ducted Flange (Optional)
Sensible Cooling Coil
and
Hot Water Coil
Condensate Pan
Electric Heater
(Optional)
DWDI Centrifugal
Blower
ECM Motor
Control Enclosure
FIGURE 1: LSC Unit Major Components (Unit Size 3 shown)
EcoShield Liner
TU-LSC-IOM
6
Filter MERV8 (Optional)