Titus FFDE/FFDER/FFDERA - Manual (Page 3)

I N S T A L L A T I O N & O P E R A T I O N M A N U A L
FFDE, FFDER, FFDERA Models
Fan Filter Unit IOM
Installation & Operation
Critical Operation Conditions of FFDE, FFDER, & FFDERA models
1. Touching of the HEPA filter will damage it, voiding the warranty on the filter. The screen is only to protect against an
accidental ‘touch’ of the filter. Never place a hand or tool on the filte . Never lie filter face flat down on a surface alwa
have filter on its side to protect from damage.
2. Prior to powering the unit, verify voltage on label and that the unit has been wired into the correct voltage. The serial
number label on the top of the unit has the required voltage.
3. To insure you order the proper replacement parts or complete unit, record the part number and serial number. This
information is located on the serial number label, located adjacent to the electrical box. If you can’t locate the Sales Order
Number, please contact Titus for this information. Once obtained, record the information for reference.
3
Units come set in manual mode from
the factory. Please review installation
requirements and set up with your end user
(See page 8 for complete set up instructions).