Titus ACC1 Small System Console - Manual (Page 9)

A D V A N C E D T E C H N I C A L M A N U A L
Control Console
ACC1: Small System
Installation & Operation
Control Console Operation
Front Panel Features
9
Power On
At power-on, the control console displays a series of parameters includ-
ing model number on the three LED displays for about one second. The
control console then cycles all segments in display to confirm that the
display is functional. Once display cycling is complete, the control con-
sole then scans all addresses valid for that model (25 or 125.)
If no fan filter unit is detected, the control console beeps then repeats
the scan sequence until at least one unit is found.
When finished, the control console will display the maximum number of
units possible in the top display top, and the total number of units found
in bottom display.
SCAN ADDRESS
NO. OF UNITS FOUND
NO EFFECT
NO EFFECT
FRONT PANEL FUNCTIONS
DURING POWER-ON
SELECTED
ADDRESS
STATUS OF
SELECTED
UNIT
SPEED OF
SELECTED
UNIT
ROTATE TO
SELECT UNIT
OR OPTION MENU
PUSH TO ENTER
OPTION MENU
ROTATE TO
ADJUST SPEED
OR OPTION
SETTINGS
PANEL FEATURES
Address Display
Addresses 1 – 99 are displayed as ‘01’ – ‘99’ in the address display
Address 100 is displayed as alternating ‘1’ and ‘00’
Addresses 101 and above are displayed as alternating ‘1’ and ‘01’ –
‘25’
Set Point Display
Set point is displayed as a percentage of motor speed; ‘00’ – ‘99’ and
‘ON’ = 100%