Regency Liberty L390EB Medium Gas Insert - Manual (Page 39)

L390E-2 / HZI390E-2 Direct Vent Gas Insert
39
installation
4 sided lOw prOFile Faceplate installatiOn
919-023a 09/26/11 1
L390E / HZI390E
4 SIDED LOW PROFILE FACEPLATE INSTALLATION
4) Install front faceplate and secure to the unit with 4 screws in locations
shown below.
Final Install
Note: Faceplate may be installed after the unit is in it's fi nal position.
3) Install Low Profi le faceplate backing plate and secure to the unit with 4
screws in locations shown below.
5) Install lower trim piece oriented as shown below.
Trim
Note: A mantel defl ector may be installed to reduce the minimum mantel height.
Refer to minimum clearances in the installation manual.
If not installing the mantel defl ector - proceed to step 3.
1) Line up the mantel defl ector (tabs to the back) with the Low Profi le back-
ing plate.
2) Bend all 3 tabs 90 º to secure the defl ector to the top of the backing plate.
The tabs should be fl ush with the underside of the top lip of the back plate.
Top of backing
plate
mantel defl ector