beautypg.com

Maintenance, Valve tray replacement – Regency Horizon HZ33CE Small Gas Fireplace User Manual

Page 53

background image

Regency HZ33CE Gas Fireplace

53

MAINTENANCE

VALVE TRAY REPLACEMENT

Removing Valve

1. Shut off the gas supply.

2. Remove the faceplate.

3. Open the fl ush door and remove the door.

4. Remove 6 screws in locations shown below to remove base tray and

pilot hood (See Diagram 1..

Diagram 1: Remove the 6 screws and then lift

out the base tray

Installing Valve

1. Install new Valve Tray Assembly.

2. Reverse steps 8-1.

Diagram 5: Lift out Valve Tray Assembly

Diagram 4

Diagram 2

Diagram 3

5. Remove 2 screws in location shown below - slide burner to the right

then lift out. (See Diagram 2.

8. Remove the 12 screws securing the valve tray assembly in place

(Diagram 4. and then lift the entire assembly out (Diagram 5..

NOTE: Parts have been hidden to shown screw locations.

6. Disconnect the inlet gas line.

7. Disconnect the EV1, EV2, and ground wires from the valve - as shown

below.

EV1

EV2

Ground