Regency Excalibur EX90 Large Wood Fireplace (Canadian Edition) - Manual (Page 26)

FPI FP90 Wood Fireplace 26
INST
ALLA
TION
finisHinG triM Kit installation
10/10/06 918-442a
WOOD FIREPLACE
EX90 / R90
FINISHING TRIM KIT
PAGE 1 OF 2
2x4 FRAMING
LEFT SIDE TRIM
RIGHT SIDE TRIM
2x4 FRAMING
TOP TRIM
STEP #1
NON-COMBUSTIBLE
AREA 60"W x 51-5
/8"H
(1524mm W x
1311mm H)
2x4 HEADE
R (ON EDGE)
STEP #2
1) Unit must be installed correctly according to the specifi cation in the manual. The nailing
strips must be attached to the top and sides of the unit. They must be positioned so
that they are set-back ½” (13 mm) from the face of the unit. This will allow for the wall
sheathing to be fl ush with the face of the unit and allow the trim to be installed correctly
(refer to Diagram 1).
Diagram 1
Assembly De tails
Unit With Finished Trim
Side
Trim
Side
Trim
Front Trim
installation