Regency Excalibur EX90 Large Wood Fireplace (Canadian Edition) - Manual (Page 24)

FPI FP90 Wood Fireplace 24
INST
ALLA
TION
MasonrY coVer plate installation
5°
INSTALL FOUR #8x1/2 SCREWS
AT THESE LOCATIONS TO ATTACH
THE SURROUND TEMPLATE SIDES
TO THE TOP.
NOTE:
SIDES SHOULD BE ASSEMBLED
FLANGES ARE ON THE
SLOTTED HOLES ON RIGHT SIDE ONLY
43.000" (1092mm)
39.250" (997mm)
ONCE THE TEMPLATE IS MOUNTED CHECK TO MAKE SURE THE SIDES ARE PLUMB AND 43" (1092mm)
IN WIDTH NOTE:
THE TOP IS ANGLED BACK AT 5 DEGREES
TO ENSURE THAT THE TEMPLATE FITS TIGHT TO THE
UNIT. THE TOP WILL BECOME MORE UPRIGHT AS THE TEMPLATE
IS TIGHTENED TO THE SURROUND MOUNTING BRACKETS
SO THAT THE 3/4" (19mm)
INSIDE OF THE OPENING.
installation
01/13/11 918-437
FP90
7) Slide the thermodisc/cover assembly into the bracket clip on the underside of the fi rebox. Check that no wire will touch the hot surfaces.