STEMCO 821-7001 BatRF Tractor Interface Module - Manual (Page 7)

5 Tractor Interface Module Installation Guide
821-7001 – USB Cable ONLY
5a. Classic - From the main menu
select “Menu” and use the down
arrow to scroll through the menu
options to the bottom of the list.
Select “OBC Administration” from
the main menu.
Tablet/BLU - From the “Home”
screen select “System” (top right)
and then “OBC Diagnostics”;
scroll down in the list box and
select “OBC Administration”
5b. ALL - Using the keyboard enter
the password, “9238” and
press “Enter”.
5c. Classic - Select “USB Device Config”.
Tablet/BLU - Scroll down in the
list box and select “USB Device
Configuration”
5d. ALL
HUB PORT TYPE BAUD
->Add New Device
Press the “Add” Button.
SERVICE TYPE
->G3 SERVICES
Press the “Select” Button
HUB ID:
Type in the number “0”
Press the “Done” Button
PORT ID:
Type in the number “2”
Press the “Done” Button
BAUD RATE
Arrow Down to ->57600
Press the “SELECT” Button
5e. ALL - Confirm the settings
are correct. HUB =0; Port=2;
Type=G3SV; BAUD=57.6
5f. Cycle the OBC power
OR Select “Menu” then “Refresh”
then “Yes” to reboot the OBC.
5a
5a
5c
5c
5e
5b
Classic LCD Display Tablet BLU & BLU II