Brother DCP-560CN - Manual (Page 86)

78
d
Wipe the inside and outside of the paper
tray with a soft cloth to remove dust.
e
Close the output paper tray cover and
put the paper tray firmly back in the
machine.
Cleaning the scanner
B
a
Lift the document cover (1). Clean the
scanner glass (2) and the white plastic
(3) with a soft lint-free cloth moistened
with a non-flammable glass cleaner.
b
(DCP-560CN only) In the ADF unit,
clean the white bar (1) and the glass
strip (2) with a lint-free cloth moistened
with a non-flammable glass cleaner.
Note
In addition to cleaning the glass strip with
a non-flammable glass cleaner, run your
finger tip over the glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the glass strip again
concentrating on that area. You may need
to repeat the cleaning process three or
four times. To test, make a copy after each
cleaning.
2
1
3
1
2