Brother DCP-560CN - Manual (Page 28)

Chapter 2
20
Loading photo paper
2
Use the photo paper tray which has been
assembled on the top of the output paper tray
cover to print on photo 10
× 15 cm and photo
L size paper. When you use the photo paper
tray, you do not have to take out the paper
that is in the tray beneath it.
a
Press the photo paper tray release
button with your left thumb and push the
photo paper tray backward until it clicks
into the photo printing position.
1 Photo Paper Tray
b
Press and slide the paper side
guides (1) and paper length guide (2) to
fit the paper size.
c
Put the photo paper into the photo paper
tray and gently adjust the paper side
guides to the paper.
Make sure the paper side guides touch
the sides of the paper.
Note
• Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
• Always make sure that the paper is not
curled.
d
When you have finished printing photos
return the photo paper tray to the normal
printing position.
Press the photo paper tray release
button with your left thumb and pull the
photo paper tray forward until it clicks.
1
1
2