SPYPOINT TINY-W3 - Manual (Page 26)

26
VIEW
Allows the user to view or delete the recorded photos on the controller
screen or on a television.
• Viewing with the screen of the controller:
When VIEW mode is selected, choose the name of the desired camera and
press OK. The last recorded photo automatically appears on the screen.
Press f or g to view the next or previous. Press OK to view the different
options available.
Date and time: To view the date and time printed on the photo.
Protect: Allows the user to protect the photo to prevent it from
being deleted by selecting "Delete All".
Delete: Allows the user to erase from the memory card, the
photo seen on the screen.
Delete all: Allows the user to erase from the memory card, all
stored photos, with the exception of protected photos.
Format: Allows the user to format memory card and delete all
protected photos.
Exit: Allows the user to exit the menu to return to the viewing
screen.
Press the  to enlarge the photo on the screen or  to return to the original
size. When the photo is enlarged, press OK to allow movement in the photo.
Then use the navigation buttons to explore different parts of the photo. To
disable the mouvement mode, press OK again.
Setup • Controller
(BLACKBOX-D)
REMOTE
Allows the user to see the camera status, to start/stop the camera, to
verify the quality of the wireless signal and to have an overview of the field
of view of the camera in real time. If more than one camera is synchronized
to the controller, choose one from those available.
Get camera status
Indicates the battery level and the percentage of used space in the memory
card of the camera.
Start/stop caméra
Allows the user to remotely stop or restart photos taking. These options can
be used if the user is working in the zone of detection of the camera and he
doesn’t want photos to be taken. When finished, he can remotely restart the
camera to continue taking photos.
Range test
Allows the user to check the quality of the wireless signal between the cam-
era and the controller. If the icon of the wireless signal is red, the
signal is too weak. Bring closer or move the controller. If the icon
of the wireless signal is green and stays green for more than 10
seconds, the signal is strong enough and stable to enable wire-
less transmission of photos to the controller.
Live view
Allows a live preview of the field of view of the camera in real time (1 photo
per second is sent to the controller). Press the BACK button to return to the
previous menu.
This mode requires more battery power.
Note: The message "Waiting for camera" appears on the screen of the
BLACKBOX-D if the controller is not synchronized with the camera or if the
wrong camera ID is selected.
Note: The preview can also be on a TV using the TV-OUT port of the
controller (see View section, p.26).
Note: The number of yellow stars that appear to the right of the screen
corresponds to the resolution of the photos stored in the BLACKBOX-D.
 =Low résolution  =Medium résolution  =High résolution