SPYPOINT TINY-W3 - Manual (Page 11)

11
Power • Receiver
(BLACKBOX)
It is possible to know the battery level of the receiver when it is turned on.
The TEST LIGHT stays on for 8 seconds when the batteries are full. When
the TEST LIGHT flashes for 8 seconds, the batteries are low and need to be
replaced. If the TEST LIGHT remains off, the batteries are completely empty
or are possibly installed in the wrong direction.
AA BATTERIES
The receiver requires 6 AA batteries (1.5V). The use of
alkaline or lithium batteries is strongly recommended.
Insert the batteries as indicated, battery polarity must
be followed.
Please note that the voltage of rechargeable AA bat-
teries (1.2V) is insufficient to power the BLACKBOX
receiver. We also recommend the use of new batteries to
ensure maximum performance of your device.
EXTERNAL (12V)
The receiver can also be powered from an external 12-volt DC input such
as a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V) or a 12-volt adapter
(AD-12V), each sold separately (p.43). During the installation of a 12-
volt connection, the AA batteries can remain safely inside the receiver. For
available accessories, see p.43.
SOLAR PANEL
The receiver can be powered with a 12-volt battery combined with a solar
panel SP-12V (sold separately, p.43) to maintain the charge of the 12-
volt battery (sold separately, p.43).
6 alkaline AA
batteries