Sensaphone WEB600 Users manual - Manual (Page 28)

28
WEB600 User’s Manual
User Programming Screen
Alarm Delivery Schedule: This weekly schedule sets the time period(s) when alarm delivery will be
active for the selected User. The schedule is divided into half-hour increments over the seven weekdays.
A check mark indicates that alarm delivery is active for that time period.
Schedule Programming Screen
ContaCt proGraMMinG
The WEB600 allows you to program up to 4 Contacts per User. The Contacts can be either: E-mail,
SMS-Text Message, or SNMP Trap. Each contact can have a programmable Schedule so that you only
receive messages when your Contact schedule is enabled. A Test button is also provided to check your
programming. When you click the Test button a test message will be sent to verify that everything is
working properly. Note: the Test button will not work until you have saved your programming.
e-Mail proGraMMinG
To configure an e-mail address choose E-mail from the drop-down list and enter your e-mail address in
the field below. Configure the Contact Schedule if desired.