Sensaphone WEB600 Users manual - Manual (Page 24)

24
WEB600 User’s Manual
ChapTer 3: Zone proGraMMInG
This chapter explains how to program the Zone Inputs for monitoring and alarming based on your
requirements. The WEB600 features numerous settings for customizing the operation of the device. To
begin, click on Zones from the menu bar. The following screen will appear:
Zones page
The Zone Programming page displays each of the six Zones, as well as Battery and Power monitoring.
Note that the battery back-up option (FGD-W610-B) is required for power monitoring. Click on any
item in the list to program a zone. A description of each parameter is described below.
Enable/Disable: This setting determines if the Zone is being used (Enabled) or not (Disabled). Selecting
Disabled will remove the gauge from the Summary screen.
Name: Enter a name for the sensor you are monitoring which describes its purpose and/or location. The
name will appear on the Summary screen as well as on alarm messages.
Type: Choose the type of sensor you are connecting to the Zone input. For temperature sensors choose
either degrees F or C.
Units: The Units field is used to describe the units of measure for the value being monitored. When
Temperature is selected the Units field will automatically display F (Fahrenheit) or C (Celsius). When a