SATEC PM180 Installation Manual - Manual (Page 29)

PM180 Substation Automation Unit 26
5.9 Log Memory
Standard onboard memory: 250 Mbytes.
5.10 Remote Display Module
RDM180 (PM180-D model)
Display: high-brightness seven-segment digital LEDs, two 4-digit windows and one 6-digit windows
Keypad: 6 push buttons
Communication: EIA RS-485 port with 12V supply voltage
Connector Type: DB15
Wires Size: up to 12 AWG (up to 2.5 mm 2 )
Distance:
3m cable (10 feet)
up to 500m (2000 feet) with external 12VDC power supply
RDM312 (PM180-M model)
Display: high-brightness seven-segment digital LEDs, nine 4-digit windows and three 6-digit windows
Keypad: 7 push buttons
Communication: EIA RS-485 port with 12V supply voltage
Connector Type: DB15
Wires Size: up to 12 AWG (up to 2.5 mm 2 )
Distance: up to 500m (2000 feet) with external 12VDC power supply
RGM180 (PM180-G)
5.7 Inch Touch-Panel LCD graphic TFT display
Resolution: 320 x 240
Communication:
EIA RS-485 port with 12V supply voltage
Connector Type: DB15
Wires Size: up to 12 AWG (up to 2.5 mm 2 )
Distance: up to 500m (2000 feet)
10/100Base T ETHERNET port with 12 V supply voltage and PoE (Power over ETHERNET)
Connector Type: RJ-45 and DB15
Operating temperature: -20°C - +70 °C