Brother DCP 8065DN - Manual (Page 80)

68
10
Installing Brother Internet Fax Printing Driver
Insert the CD-ROM supplied with your Brother machine into your CD-ROM Drive. The installer screen will
automatically start.
Note
If the installer screen does not appear automatically, select Start/Run and type X:/setup.exe.
(X:/ should be the drive letter of your CD-ROM drive on your PC)
1
Select Install Optional Applications.
2
Select Brother Internet Fax Printing (BFP) Driver.
3
Click Install.
Next you will be presented with the licensing agreement, please carefully read the agreement and make the
necessary choice.
During the installation you are
presented with the following screen,
select the default unless you have
previously installed this software. If this
is the case use a port number that has
not been previously configured.
Example BFP2
You also need to enter certain
information into the printer driver dialog
screen.
It is very important that you enter your
own E-mail address. You also need to
configure the SMTP mail server IP
address or Node Name.
Note
If in any doubt contact your Network Administrator for assistance.
When Installing BFP on Windows ®
2000/XP and Windows NT ® 4.0
operating systems we recommend
that you add a “:” to the end of the
port name.
This can be the Node
Name or IP address of
the E-mail server
Here you can enter the default E-mail
address of the print server or you can
leave it blank.
* If an address is specified here this
will always be used as default