Brother DCP 8065DN User Manual
Page 104
Appendix A
92
A
Local> SET IP SUBNET 255.255.255.0
If you do not have any subnets, use one of the following default subnet masks:
255.0.0.0 for class A networks
255.255.0.0 for class B networks
255.255.255.0 for class C networks
The leftmost group of digits in your IP address can identify the type of network you have. The value of this
group ranges from 1 through 127 for Class A networks (e.g., 13.27.7.1), 128 through 191 for Class B networks
(e.g.,128.10.1.30), and 192 through 223 for Class C networks (e.g., 192.168.1.4).
If you have a gateway (router), enter its address with the command
SET IP ROUTER routeraddress,
where
routeraddress is the desired IP address of the gateway you wish to assign to the print server. For
example:
Local> SET IP ROUTER 192.168.1.4
Type
SET IP METHOD STATIC to set the method of IP access configuration to static.
To verify that you have entered the IP information correctly, type
SHOW IP.
Type
EXIT or Ctrl-D (i.e., hold down the control key and type "D") to end the remote console session.
Using the Brother Web BRAdmin server software for IIS* to configure the IP
address
The Web BRAdmin server software is designed to manage all LAN/WAN Brother network connected devices.
By installing the Web BRAdmin server software on a computer running IIS*, Administrators with a web
browser can connect to the Web BRAdmin server, which then communicates with the device itself. Unlike the
BRAdmin Professional utility - which is designed for Windows
®
systems only - the Web BRAdmin server
software can be accessed from any client computer with a web browser that supports Java.
Please note this software is not included on the CD-ROM that was supplied with your Brother product.
to learn more about this software and to download it.
IIS* = Internet Information Server 4.0, 5.0 or 5.1