Remote setup (not available for dcp-8065dn), Types of network connections, Network connection example – Brother DCP 8065DN User Manual

Page 15: Peer-to-peer printing using tcp/ip, Remote setup, Not available for dcp-8065dn)

Introduction

Remote Setup

(Not available for DCP-8065DN)

The Remote Setup software allows you to configure network settings from a Windows

or Macintosh

(Mac

X 10.2.4 or greater). (See Chapter 5 for Windows

and Chapter 11 for Macintosh

of the Software User’s

Guide on the CD-ROM).

Types of Network Connections

Generally speaking, there are two types of networks: A Peer-to-Peer network and a shared Network.

Network Connection Example

Peer-to-Peer printing using TCP/IP

In a Peer-to-Peer environment, each computer directly sends and receives data to each device. There is no
central server controlling File access or Printer sharing.

■

In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easier
to configure than the Network Shared Printing method described on the following page. See

Network

Shared Printing on page 4.

■

Each computer must use the TCP/IP Protocol.

■

The Brother machine needs an appropriate IP address configuration.

■

If you are using a router, the Gateway address must be configured on the computers and the Brother
machine.

TCP/IP

Windows

Network printer (your machine)

Switch or
Router