2 add a new group, 3 delete groups, 4 change the group name – Penpower WorldCard plus (Mac) v.3.2 User Manual
Page 16: 5 setting groups for the contact
4-2
WorldCard Mac
4.2.2 Add a New Group
1. Click [Management]/ [Group]/[New Group].
2. Type the group name in the group management area on the left.
Note:
1. The new group name can’t be the same as the existed groups.
2. Click at the lower left corner can add a new group, too.
4.2.3 Delete Groups
Select the group you want to delete, and click [Management]/ [Group]/ [Delete group].
Note:
1. After you delete a group, if a contact in the deleted group also belongs to another group, then you
can find the contact in the other group. If a contact in the deleted group doesn’t belong to any
other group, then the contact will be move to the [Unfiled] group.
2. Click at the lower left corner can delete the group, too.
4.2.4 Change the Group Name
Click [Management]/ [Group]/ [Rename group], and enter the new name for this group.
Note: The renamed group name can’t be the same as the existed groups.
4.2.5 Setting Groups for the Contact
To set groups for the contact, please select a contact, and execute [Management]/[Contact]/
[Setting Group] or right-click and select [Setting Group], check the groups you’d like to set
for the contact on the Group Management dialogue window, then click [OK].