Orbital Minotaur I User Manual
Orbital Equipment
Table of contents
Document Outline
- MINOTAUR I USER'S GUIDE - MARCH 2014 - RELEASE 3.0
- Revision Summary
- Preface
- Table of Contents
- Glossary
- 1. INTRODUCTION
- 2. MINOTAUR I CONFIGURATIONS
- 3. GENERAL PERFORMANCE
- 4. PAYLOAD ENVIRONMENT
- 4.1. Steady State and Transient Acceleration Loads
- 4.2. Payload Vibration Environment
- 4.3. Payload Acoustic Environment
- 4.4. Payload Shock Environment
- 4.5. Payload Structural Integrity and Environments Verification
- 4.6. Thermal and Humidity Environments
- 4.6.1. Ground Operations
- a. Dry Bulb Temperature: 13 to 29 C (55 to 85 F) controllable to ±5 C (±10 F) of setpoint
- b. Temperature environment lower limit is 12.8 C (55 F) due to the Orion 38 motor’s limit
- c. Standard Setpoint: 18.3 C (65 F)
- d. Dew Point Temperature: 3 to 17 C (38 to 62 F)
- e. Relative Humidity: determined by drybulb and dew point temperature selections and generally controlled to within ±15%. Relative humidity is bound by the psychrometric chart and will be controlled such that the dew point within the fairing is never...
- f. Nominal Flow: 11.3 m3/min (400 cfm)
- 4.6.2. Powered Flight
- 4.6.3. Nitrogen Purge (non-standard service)
- 4.6.1. Ground Operations
- 4.7. Payload Contamination Control
- 4.8. Payload Electromagnetic Environment
- 5. PAYLOAD INTERFACES
- 5.1. Payload Fairing
- 5.2. Payload Mechanical Interface and Separation System
- 5.3. Payload Electrical Interfaces
- 5.3.1. Payload Umbilical Interfaces
- 5.3.2. Payload Interface Circuitry
- 5.3.3. Payload Battery Charging
- 5.3.4. Payload Command and Control
- 5.3.5. Pyrotechnic Initiation Signals
- 5.3.6. Payload Telemetry
- 5.3.7. Payload Separation Monitor Loopbacks
- 5.3.8. Telemetry Interfaces
- 5.3.9. Non Standard Electrical Interfaces
- 5.3.10. Electrical Launch Support Equipment
- 5.4. Payload Design Constraints
- 6. MISSION INTEGRATION
- 6.1. Mission Management Approach
- 6.2. Mission Planning and Development
- a. Mission management, document exchanges, meetings, and formal reviews required to coordinate and manage the launch service.
- b. Mission analyses and payload integration, document exchanges, and meetings.
- c. Design, review, procurement, testing and integration of all mission-peculiar hardware and software.
- d. Range interface, safety, and flight operations activities, document exchanges, meetings and reviews.
- 6.2.1. Mission Assurance
- 6.3. Mission Integration Process
- 6.3.1. Integration Meetings
- 6.3.2. Mission Design Reviews (MDR)
- 6.3.3. Readiness Reviews
- a. Pre-Ship Readiness Review — Conducted prior to committing flight hardware and personnel to the field. The PSRR provides testing results on all formal systems tests and reviews the major mechanical assemblies which are completed and ready for shippi...
- b. Incremental Readiness Review (IRR) – The quantity and timing of IRR(s) depends on the complexity and Mission Assurance Category of the mission. IRRs typically occur 2-12 months prior to the launch date. IRR provides an early assessment of the integ...
- c. Mission Readiness Review (MRR) — Conducted within 2 months of launch, the MRR provides a pre-launch assessment of integrated launch vehicle/payload/facility readiness prior to committing significant resources to the launch campaign.
- d. Flight Readiness Review (FRR) – The FRR is conducted at L-10 days and determines the readiness of the integrated launch vehicle/payload/facility for a safe and successful launch. It also ensures that all flight and ground hardware, software, person...
- e. Launch Readiness Review (LRR) — The LRR is conducted at L-1 day and serves as the final assessment of mission readiness prior to activation of range resources on the day of launch.
- 6.4. Documentation
- 6.4.1. Customer-Provided Documentation
- 6.4.1.1. Payload Questionnaire
- 6.4.1.2. ICD Inputs
- 6.4.1.3. Payload Mass Properties
- 6.4.1.4. Payload Finite Element Model
- 6.4.1.5. Payload Thermal Model for Integrated Thermal Analysis
- 6.4.1.6. Payload Drawings
- 6.4.1.7. Program Requirements Document (PRD) Mission Specific Annex Inputs
- 6.4.1.8. Payload Launch Site Integration Procedures
- 6.4.1.9. ICD Verification Documentation
- 6.4.2. Orbital Produced Documentation, Data, and Analyses
- 6.4.2.1. Launch Vehicle to Payload ICD
- 6.4.2.2. ICD Verification Documentation
- 6.4.2.3. Preliminary Mission Analyses
- 6.4.2.4. Coupled Loads Analyses (CLA)
- 6.4.2.5. Integrated Launch Site Procedures
- 6.4.2.6. Missile System Pre-Launch Safety Package (MSPSP) Annex
- 6.4.2.7. PRD Mission Specific Annex
- 6.4.2.8. Launch Operation Requirements (OR)
- 6.4.2.9. Mission Constraints Document (MCD)
- 6.4.2.10. Final Countdown Procedure
- 6.4.2.11. Post-Launch Analyses
- 6.4.1. Customer-Provided Documentation
- 6.5. Safety
- 7. GROUND AND LAUNCH OPERATIONS
- 8. OPTIONAL ENHANCED CAPABILITIES
- 8.1. Separation System
- 8.2. Conditioned Air
- 8.3. Nitrogen Purge
- 8.4. Additional Access Panel
- 8.5. Enhanced Telemetry
- 8.6. Enhanced Contamination Control
- 8.7. Secure FTS
- 8.8. Over Horizon Telemetry
- 8.9. Increased Insertion Accuracy
- 8.10. Payload Isolation System
- 8.11. Orbital Debris Mitigation
- 8.12. Dual and Multi Payload Adapter Fittings
- 8.13. Minotaur I Launch Vehicle Enhanced Performance Configuration
- 8.14. Large Fairing
- 8.15. Hydrazine Servicing
- 8.16. Nitrogen Tetroxide Service
- 8.17. Poly-Pico Orbital Deployer (P-POD)
- 8.18. Suborbital Performance
- 8.19. Alternate Launch Location