Orbit Baby G3 Infant Car Seat and Base - Manual (Page 34)

66
66
Securing Y
our Child
Securing Y
our Child
67
67 Sizing the Restraint Harness to Your Child
cont’d Securing Your Child with the
Restraint Harness
Failure to properly position and
adjust the shoulder straps to
your child’s size increases the
risk of serious injury or death
in the event of a sharp turn,
sudden stop or crash.
• The shoulder straps must be
below the top of the child’s
shoulders.
•
The restraint harness must be
snugly adjusted to your child.
PINCH HAZARD: When buckling,
make sure all fingers and hands
are free from chest clip and
buckle tongues.
STRANGULATION HAZARD:
Never leave child in car seat when
restraint harness is loose or undone.
⚠WARNING⚠
Death or Serious Injury Can Occur
A K
J
I
strap through the correct upholstery
slots and corresponding plastic shell
slots (Photo I).
5. CHECK that the shoulder straps are
threaded into slots at the same height
and that neither shoulder strap is
twisted (Photo J).
6. Turn to the back of the car seat again.
Secure each shoulder strap loop
entirely onto its corresponding splitter
plate (Photo K).
7. CHECK that the straps are secure by
pulling on the shoulder straps from the
front.
8. CHECK that the upholstery around the
shoulder strap slots do not interfere
with the free movement of the restraint
harness.
9. Close and secure the rear panel of the
car seat and secure all upholstery.