Orbit Baby G3 Infant Car Seat and Base User Manual

Page 13

Usage Recommendations

In addition, the center-rear seating location is considered the best location if ALL
the following conditions are met:

Installation in this seating location is permitted by the vehicle manufacturer.

LATCH/UAS belt or vehicle seat belt provides a secure installation and

remains tightly adjusted around the car seat,

The vehicle seat contour allows the car seat to be properly leveled once

installed,

If the vehicle seat back is adjustable, the vehicle seat back is locked into the

upright position.

If all of these conditions are not met, install the car seat in a different seating
location.

After you have chosen a seating location, follow the car seat information in your
vehicle owner’s manual, and the instructions in this manual, for installation using
LATCH/UAS or a vehicle seat belt.

Seat Positions & Vehicle Restraint
Options

cont’d

General Guidelines:

• This car seat can be installed in

passenger cars (such as vans),

multipurpose passenger vehicles (such as

sports utility vehicles), trucks, and buses

with qualifying anchorage or belt systems.

This car seat may NOT be installed in

low-speed vehicles (such as golf carts or

all-terrain vehicles) or on motorcycles.

• Never secure this car seat rear-facing

in a seating location with a front air bag

(Figure A). Check your vehicle owner’s

manual regarding all other air bag

locations and compatibility with child

restraints.

• Never secure the car seat in a vehicle

seating location unless recommended by

the vehicle owner’s manual.

• Only install the car seat in forward-facing

vehicle seats. Never install car seat in

side-facing or rear-facing vehicle seats

(Figure B & C).

• Never secure the car seat in vehicle

seating locations where the vehicle seat

back does not lock in an upright position.

Choosing a Vehicle Seating Location

cont’d