Opticon OPN 2001 Device Parameters - Manual (Page 3)

Opticon OPN2001 User Parameters
Page 3 of 3
UPCA Preamble 0=None
1=System char
2=System + country code
1 = System
char
36 (0x24)
UPCE Preamble 0=None
1=System char
2=System + country code
1 = System
char
37 (0x25)
Scratch Pad A 32 byte storage area unused by
the OPN2001. For customer use.
None No Default
Values
38 (0x26)
Convert UPCE to UPCA 1=Enable
0=Disable
Disabled 41 (0x29)
Convert EAN8 to EAN13 Add zero’s but do not change the
code type
1=Enable
0=Disable
Disabled 42 (0x2a)
Send UPCA Check Digit 1=Enable
0=Disable
Enabled 43 (0x2b)
Send UPCE Check Digit 1=Enable
0=Disable
Enabled 44 (0x2c)
Transmit Code 39
Check Digit
1=Enable
0=Disable
Disabled 45 (0x2d)
Code 39 Check Digit 1=Enable
0=Disable
Disabled 46 (0x2e)
UPC/EAN Addon
redundancy
# of times to decode UPC/EAN
barcode without addon.
2 – 20 2 48 (0x30)
EAN 128 1=Enable
0=Disable
Enabled 52 (0x34)
UPC Addon 0=No Addon
1=Addon Only
2=Both
2=Both 53 (0x35)
Code 39 Full ASCII 1=Enable
0=Disable
Disabled 54 (0x36)
Convert EAN8 to EAN13
Type
Add zero’s and change code type
to EAN13
1=Enable
0=Disable
Disabled 55 (0x37)
Industrial 2of5 1=Enable
0=Disable
Disabled 57 (0x39)
Interleaved 2of5 1=Enable
0=Disable
Enabled 58 (0x3A)
Interleaved 2of5
Length 1, Length 2
One Discrete Length
Two Discrete Lengths
Length Within Range
Any Length
L1 = length, L2 = 0
L1 > L2
L1 < L2
L1 = 0, L2 = 0
L1 = 14
L2 = 0
59 (0x3B)
60 (0x3C)
Industrial 2of5
Length 1, Length 2
One Discrete Length
Two Discrete Lengths
Length Within Range
Any Length
L1 = length, L2 = 0
L1 > L2
L1 < L2
L1 = 0, L2 = 0
L1 = 12
L2 = 0
61 (0x3D)
62 (0x3E)
Convert Interleaved 2of5
to EAN 13
1=Enable
0=Disable
Disabled 63 (0x3F)
Transmit Interleaved 2of5
Check Digit
1=Enable
0=Disable
Disabled 64 (0x40)
Interleaved 2of5
Check Digit
0=Disabled
1=Enable
Disabled 65 (0x41)
Beeper Toggle Allows user to toggle beeper
On/Off with the scan key
0 = No
1 = Yes
1 85 (0x55)
Beeper ON/OFF Enables or disables the beeper. 0 = Beeper Off
1 = Beeper On
1 87 (0x57)