Opticon CRD 972X - Manual (Page 20)

20 - OPTICON OPL972X/CRD972X
2.6 COMMUNICATION
2.6.1 RS32 INTERFACE
Check if the chosen COM port matches the COM
port in the user’s application program.
Check if the baud rate of the Opticon device and
the host computer are matching.
2.6.2 USB INTERFACE
Check if the defined COM port in Windows
matches the COM port in the user’s application
program.
Check if the baud rate of the Opticon device and
the host computer are matching.
2.6.3 MULTICRADLE SINGLE COMMUNICA-
TION
When using the multicradle type with single com-
munication, note that the model has only one slot
that supports communication. To transmit data to
the host, place the bar code data collector in the
right slot of the cradle seen from the front side.
2.6.4 BLUETOOTH BAR CODE DATA COLLEC-
TOR
The Opticon Bluetooth device will communicate
with the SIG certified Bluetooth devices. The
choice in profile (SPP or DUN) that needs to be
supported must be set in the user’s application pro-
gram.