Multiquip WSHE_A_SERIES - Manual (Page 16)

page 16 — WSHe/a vibraTory TruSS Screed • operaTion manual — rev. #0 (05/22/12)
liftinG prOcedure
liFTing THe Screed
The following procedure and Figure 1 describe how to lift
the vibratory screed.
1. Attach the U-shaped hanger and associated hardware
to the top of each truss frame section as shown in
Figure 1. Tighten hanger securely so that it will not slip.
Warning
never lift the screed to unnecessary heights.
alWayS make sure that no one is standing underneath
the screed while it is being lifted.
2. Utilize a spreader bar of proper length and lifting
capacity. Secure lifting straps from both ends of the
spreader bar to the attached lifting hangers.
3. Connect lifting cables from the spreader bar to the
lifting hook of a crane or forklift. Ensure that the lifting
hook and chain are of appropriate lifting capacity.
4. Use crane or forklift to hoist screed onto a flatbed truck
for transporting or onto the form for screeding.
Figure 1. Lifting the Screed
FRONT