MK Diamond MK-2000 - Manual (Page 33)

MK-2000 Revision 03/05, Effective Date March 21, 2005 Page 33
MAINTENANCE AND TROUBLESHOOTING
TROUBLESHOOTING:
1. Blade Will Not Cut Properly:
2. Movable Cutting Table Does Not Move Correctly:
Return to
MK Diamond
for Repair
(E)
Return to MK Diamond
(B)
Ensure the Movable Cutting
Table Roller Wheels are clean
and in good condition, clean or
replace if necessary
(A)
Check that the Movable Cutting
Table Guide Rails are clean
and clean if dirty
(B)
Check for proper rotation
(A)
Check the Blade for
smoothness or “Glazing” and
Dress the Blade if it is "Glazed"
(C)
Ensure the blade core is not
bent
If Rotation
correct, go
to Step C
If not “Glazed,
go to Step B
If “Glazed,” Dress
(See Blade Dressing)
If Core not bent,
go to Step D
If Core bent,
change Blade Rotation Direction
(D)
Verify the Blade is correct for
the material being cut
If Blade correct,
go to Step E
Contact Place of Purchase or
MK Diamond (800 421-5830)
to verify Blade
Return to
MK Diamond
for Repair
(C)
Return to MK Diamond
Roller Wheels
Guide Rail